{"id":661,"date":"2026-11-03T16:38:11","date_gmt":"2026-11-03T08:38:11","guid":{"rendered":"http:\/\/www.jlstonefactory.com\/blog\/?p=661"},"modified":"2026-11-03T16:38:11","modified_gmt":"2026-11-03T08:38:11","slug":"what-is-the-difference-between-a-positive-displacement-pump-and-a-centrifugal-pump-4114-3ecb9f","status":"publish","type":"post","link":"http:\/\/www.jlstonefactory.com\/blog\/2026\/11\/03\/what-is-the-difference-between-a-positive-displacement-pump-and-a-centrifugal-pump-4114-3ecb9f\/","title":{"rendered":"What is the difference between a positive displacement pump and a centrifugal pump?"},"content":{"rendered":"

If you\u2019ve ever spent time in industrial manufacturing, water treatment, or even moving materials around a commercial farm, chances are you\u2019ve relied on a pump without giving it much thought. As someone who\u2019s worked in the pump supply industry for over a decade \u2013 helping small shops, large factories, and municipal teams find the right equipment for their unique needs \u2013 I\u2019ve lost count of how many times I\u2019ve been asked: \u201cWhat\u2019s the actual difference between positive displacement pumps and centrifugal pumps?\u201d It\u2019s a fair question, and the answer isn\u2019t just for engineers. For anyone looking to buy a pump, understanding these two core types can save you money, downtime, and a lot of frustration down the line. Pump<\/a><\/p>\n

<\/p>\n

Let\u2019s start with the basics of how each pump works, because that\u2019s where their differences stem from. A centrifugal pump is the workhorse of most general pumping applications. It uses a rotating impeller \u2013 that\u2019s the bladed wheel inside the pump casing \u2013 to move fluid. When the impeller spins, it creates a low-pressure area at the center, which pulls fluid into the pump, then flings it outward by centrifugal force. That force builds up velocity, which then turns into pressure as the fluid moves through the pump\u2019s outlet and into your pipeline. Centrifugal pumps are simple to design, relatively low-cost for what they do, and great for moving large volumes of thin fluid \u2013 like water, gasoline, or light oil \u2013 over long distances or up a moderate elevation.<\/p>\n

Positive displacement (PD) pumps, on the other hand, work on a completely different principle. Instead of using centrifugal force to move fluid, they trap a fixed amount of fluid in a chamber, then force that fluid out by reducing the volume of the chamber. Think of a bike pump: when you push the plunger down, the space inside the pump barrel shrinks, and the air (or fluid, if you were using water) gets pushed out the nozzle. PD pumps come in two main varieties: reciprocating, which use a piston or diaphragm that moves back and forth, and rotary, which use gears, screws, or lobes that rotate to trap and move fluid. Gears in a gear pump, for example, mesh together inside a tight casing; as they spin, the spaces between the gears trap fluid on one side, carry it around the casing, and push it out the discharge side when the gears meet. That\u2019s a rough sketch of the core mechanics, but let\u2019s dive into the key differences that matter for anyone selecting a pump.<\/p>\n

First up, flow rate and pressure \u2013 the two numbers that matter most for most projects. Centrifugal pumps have a what\u2019s called a \u201cperformance curve\u201d that\u2019s non-linear. That means as you increase the pressure (or head, as we call it in the industry), the flow rate decreases. If you throttle the outlet valve to build more pressure, the pump has to work harder to push fluid, so it moves less of it. At zero pressure (meaning the outlet is wide open), a centrifugal pump moves the maximum flow, and as the head goes up, flow drops. That\u2019s why centrifugal pumps are ideal for applications where you need a lot of flow at a moderate pressure \u2013 like feeding a sprinkler system, moving raw water from a river to a treatment plant, or circulating coolant in a car engine. If you need to push thin fluid over a long distance or up a small hill, a centrifugal pump will do that efficiently.<\/p>\n

PD pumps are the opposite when it comes to pressure and flow. For a PD pump, the flow rate is almost constant, regardless of the pressure you build. That fixed flow per cycle \u2013 the amount of fluid trapped and pushed each time \u2013 means as long as the pump\u2019s power source (an electric motor, engine, or hydraulic drive) can handle the load, it will move the same amount of fluid no matter how much backpressure you create. If you throttle the outlet valve on a PD pump, it will just build more pressure until something gives \u2013 either the pump\u2019s internal components, the pipeline, or a pressure relief valve you installed. That makes PD pumps perfect for applications that need consistent flow at high pressure. Think of pumping thick, viscous fluids like syrup, asphalt, or heavy crude oil, or moving fluid through a small, narrow pipeline that creates a lot of backpressure, or injecting chemicals into a process line where you need a precise, steady dose. A PD pump will deliver that same 10 gallons per minute even if you need to push it through a 1000-foot pipe, whereas a centrifugal pump might drop to 5 gallons per minute under that same pressure.<\/p>\n

Next, viscosity \u2013 how thick or thin your fluid is \u2013 is a big factor. Centrifugal pumps work best with low to medium viscosity fluids. When a fluid is thick, like molasses, it\u2019s harder for the impeller\u2019s centrifugal force to grab it and fling it outward. Viscous fluids also create more drag on the impeller, so the pump uses more energy to move less fluid. If you try to pump 10,000 centipoise (cP) fluid with a standard centrifugal pump, you\u2019ll end up with 50% less flow and 30% higher energy costs than the pump\u2019s manufacturer rated, and you\u2019ll wear out the impeller and casing much faster. PD pumps, though, thrive on viscosity. The trapped chamber principle doesn\u2019t care as much about how thick the fluid is \u2013 as long as the fluid can fill the chamber, the pump will move it. Gear pumps and screw pumps, for example, can handle fluids up to 100,000 cP easily, and even some higher. That\u2019s why you\u2019ll see PD pumps used in food processing, pumping chocolate or dough, or in the oil industry moving heavy crude \u2013 jobs where centrifugal pumps would gum up or underperform.<\/p>\n

Suction lift \u2013 the ability of a pump to pull fluid from a source, like a tank or a well \u2013 is another key difference. Centrifugal pumps have a limited suction lift, mostly because they rely on creating a low-pressure area at the impeller\u2019s center. The maximum suction lift for a standard centrifugal pump is around 25 feet, but that\u2019s only in ideal conditions with thin, cool water. If the fluid is warm, it\u2019s more likely to vaporize at that low pressure, which creates a problem called cavitation \u2013 small bubbles that form, then collapse violently inside the pump, causing noise, vibration, and damage over time. If you need to pull fluid from a source that\u2019s 30 feet or more below the pump, or if you\u2019re dealing with warm, low-vapor-pressure fluid, a centrifugal pump might not work at all without a priming system or a booster pump. PD pumps, though, self-prime most of the time and have much better suction capabilities. Because they trap fluid and push it out, they can often pull fluid from a source that\u2019s 20 or 30 feet below, and they\u2019re less prone to cavitation. That\u2019s why PD pumps are often used for transferring fluid between tanks, where the pump isn\u2019t submerged in the inlet fluid.<\/p>\n

Cost, maintenance, and efficiency over time are also big considerations. Centrifugal pumps are generally cheaper upfront. The impeller, casing, and seal system are simple, with fewer moving parts than PD pumps \u2013 most centrifugal pumps have just the impeller and a drive shaft, plus a mechanical seal to prevent leaks. That means replacement parts are inexpensive, and routine maintenance is quick: you can change a seal or inspect an impeller in an hour, usually. The downside is that they\u2019re less efficient at low flow or high pressure, so if your application is on the edge of what a centrifugal pump can handle, the operating costs will add up over years. PD pumps, though, are more expensive initially, especially for large models. Their internal components \u2013 gears, rotors, diaphragms \u2013 are precision-made, so they cost more to manufacture and buy. Maintenance can also be more involved: gear pumps need regular lubrication, and if the fluid is abrasive, the rotors or diaphragms will wear out faster. But when they\u2019re matched to the right application, PD pumps are much more efficient. A gear pump moving thick fluid will use 20-30% less energy than a centrifugal pump would for the same job, and they can last 10+ years with proper care.<\/p>\n

Let\u2019s talk about real-world examples to make this concrete. If you\u2019re a small municipal water department looking to move 500 gallons per minute of water from a reservoir to a treatment plant 2 miles away, a centrifugal pump is the obvious choice. It will move that volume efficiently, the upfront cost is low, and maintenance is simple for your team to handle. If you\u2019re a bakery that needs to pump 100 gallons per minute of chocolate from a mixing tank to a packaging line, a centrifugal pump would gum up and move half the amount you need. A rotary lobe PD pump, though, will move that thick chocolate smoothly, no clogging, and maintain a consistent flow even if the line is long. If you\u2019re a farm needing to pump fertilizer from a 15-foot deep tank into a spray rig, a centrifugal pump might work, but if the fertilizer is viscous or has small particles, a PD pump will handle it better without wearing out quickly. I\u2019ve had customers come to me after trying to use a centrifugal pump for a heavy oil transfer job \u2013 they ended up replacing three pumps in six months because of cavitation and wear, before switching to a PD pump that\u2019s run flawlessly for three years.<\/p>\n

Of course, there are exceptions, and no pump type is right for every job. Some applications even use both: for example, a water treatment plant might use a centrifugal pump for moving large volumes of raw water, and a small PD pump for injecting chemical additives at a precise rate. The line between the two can blur too \u2013 modern pump designs have hybrid models, but for the most part, the core principles hold.<\/p>\n

As a pump supplier, my job isn\u2019t just to sell equipment \u2013 it\u2019s to make sure you get the right pump for your needs, not the one that\u2019s cheapest or easiest to stock. I\u2019ve seen too many business owners cut corners on a pump that\u2019s wrong for their application, leading to downtime that costs thousands in lost production, or energy bills that eat into profits month after month. If you\u2019re working on a new project, replacing an old pump, or just looking to upgrade your current setup, take a minute to map out your needs: what\u2019s the fluid\u2019s viscosity? How much flow do you need, and at what pressure? How far is the fluid source from the pump? What\u2019s your budget, both upfront and for long-term maintenance? That will tell you which type is better.<\/p>\n

<\/p>\n

When you\u2019re ready to sort through the details, reach out to our team to discuss your specific pump needs. We can walk through your application, explain the pros and cons of each pump type for your job, and help you pick a solution that\u2019s reliable, efficient, and fits your budget. No jargon, no pushy sales tactics \u2013 just straight talk about what will work best for you.<\/p>\n

Pump<\/a> References:<\/p>\n

    \n
  1. Karassik, I. J., Krutzsch, W. C., Fraser, W. H., & Messina, J. P. (Eds.). (2001). Pump Handbook (4th ed.). McGraw-Hill.<\/li>\n
  2. Department of Energy. (2020). Pump System Optimization Guide for Industrial Facilities. U.S. Department of Energy, Industrial Technologies Office.<\/li>\n
  3. Gascho, G. J. (1986). Positive Displacement Pumps for Agricultural Applications. Transactions of the ASAE, 29(6), 1647-1652.<\/li>\n<\/ol>\n
    \n

    Henan Yibeng Pump Industry Co., Ltd.<\/a>
    Henan Yibeng Pump Industry Co., Ltd. is one of the leading pump manufacturers and suppliers in China. We warmly welcome you to buy high-grade pump from our factory. All equipment are with high quality and competitive price. Contact us for more details.
    Address: Fengqiu County, Zhaogang Town, Xinxiang City, Henan Province, China.
    E-mail: info@hnybpumps.com
    WebSite:     https:\/\/www.hnybpumps.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    If you\u2019ve ever spent time in industrial manufacturing, water treatment, or even moving materials around a … What is the difference between a positive displacement pump and a centrifugal pump?<\/span>Read more<\/a><\/p>\n","protected":false},"author":289,"featured_media":661,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[624],"class_list":["post-661","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-pump-41a7-3f0743"],"_links":{"self":[{"href":"http:\/\/www.jlstonefactory.com\/blog\/wp-json\/wp\/v2\/posts\/661","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.jlstonefactory.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.jlstonefactory.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.jlstonefactory.com\/blog\/wp-json\/wp\/v2\/users\/289"}],"replies":[{"embeddable":true,"href":"http:\/\/www.jlstonefactory.com\/blog\/wp-json\/wp\/v2\/comments?post=661"}],"version-history":[{"count":0,"href":"http:\/\/www.jlstonefactory.com\/blog\/wp-json\/wp\/v2\/posts\/661\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.jlstonefactory.com\/blog\/wp-json\/wp\/v2\/posts\/661"}],"wp:attachment":[{"href":"http:\/\/www.jlstonefactory.com\/blog\/wp-json\/wp\/v2\/media?parent=661"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.jlstonefactory.com\/blog\/wp-json\/wp\/v2\/categories?post=661"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.jlstonefactory.com\/blog\/wp-json\/wp\/v2\/tags?post=661"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}